Model Number

OKO-2OOOup

Product Description

Microprocessor cleaning system, water based with turbo dtying
Cleaning effect: Very good because. More than Mil-spec for cleaning.
Universal PCB Water Cleaning by the Microprocessor controlled

• Flux residues are completely removed.
• Solder joint and components are not effected.
• The Cleaning is completly removed after the cleaning process.
• The Cleaning result exceeds MIL-STD-2000 by a factor of 3 ~ 4.
  

Product Feature  

Cleaning
Cleaning : Various alkaline cleaning are available.
Please let us advise you.

• Cleaning Method : Spray (Dishwasher).
• Cleaning effect : Very good because.
  -. Flux residues are co,pletly removed.
  -. Solder joints and components are not effected.
  -. The cleaner is completely removed after the cleaning process.
  -. The cleaning result exceeds MIL-STD-2000 by a factor of 3-4.

The follwing is

• Removed without residue: Rosin-based fluxes.
  
• Water-Soluble flues.
  

  Drying

• Method : heat Air cleaned of a fine particle filter is blown into the system chamber where it absorbs moisture and dischages through the heat recovery system.
  

   

• Air temperaure at inlet to machine chamber : 100'C Max.
  
• temperature inside chamber : 80'C Max.
  
• Duration of warm air Drying : 0.1 ~ 4 hours adjustable. (0.5 hours are recommended).

TECHNICAL INFORMATION
The water is warmed in a through-flow heater so that there is no inconvenient heater inside the chamber. The water protection system and the floor tray eddectively prevent any leakage of water. They ensure effective protection agaist water damage. A very low noise level is achieved through comprehensive 6- sided all round sound insulation.

• Convince youself of the cleaning quality of our systems.
  We shall be pleased to see you on our premises for practical demonstration. or you can send us a few circuit boards for a trial. cleaning.
  

   

• PURITY MINITORING
  In order to monitor the purty of the final sinse water its conductivity is measued inthe machine and indicated on a display. When an adjustable limit has been exceeded the programme sequence is intrructed and ther as an alarm.
  
• Automatic dosing of liquid cleaner using bulit-in dising pump.
  (A second dosing pump can be supplied as Optionnal.
  

Product Specification / Models

Optional

• Wash temperature : 20 ~ 70'C. 
• Wash time : 5 ~ 40 min. 
• Rinse temperature : 20 ~ 70'C. 
• Rinse time : 2 ~ 10 min.
• Warm Air drying Temperure : 40 ~ 100'C
• Drying timr : 0.1 ~ 10 h.
• Also possible only wash program, only drying programmes.
• Power 230V AC. 
• Running Sound : approx 55dB(A). 
• Cicuit board Size : Max 430mm x 510 *(only lower basket).
• Dimenstion. HxWxD : 820 x 600 x 720mm. 
• Weight : approx. 53 Kg. 

• We reserve the right to introduce modifications in line with technical progress.

• NE Water deionser unit NE-20. 
• Wash, transport and storege basket for 2000 and 1000 . 
• Air Filter. 
• Water Filter Unit. 
• Mil-STD 2000 factor 3~4. 

Application

Cleaning Machine for Part information
• Model: Oko-1000uP : wash frame x 1. wash basket x 1.
  (1) Dimention : 450 x 560 x 620mm. Work Area 390 x 260mm
• Model : Oko-2000uP : wash frame x 2 . Wash basket x 2 사용가능.
  (1) Dimention : 820 x 600 x 720mm. Work Area 430 x 510mm.
• NE-20 : Water deioniser Unit 
• Antisat Wash transport frame 
• Assembled circuit boards for Water cleaning. 
• SMD paste stencils for water cleaning. 
• Electronic Parts. Press. coil. HIC. and other cleaning.